KOVAN

[ Method of application ]

1. Vehicle Washing and Drying: Thoroughly remove all contaminants from the vehicle's surface and ensure it is completely dry. Applying the coating to a wet surface can reduce adhesion.

2. Working Environment: It is best to work in a shaded area with good ventilation, avoiding direct sunlight. Avoid application in extreme temperatures (e.g., above 30℃ or below 5℃).

3. Applicator Preparation: Wrap the provided suede cloth around the applicator and apply a sufficient amount of product. It is better to apply a moderate amount multiple times rather than a large amount at once.

4. Application: Evenly spread a thin layer of the product onto the surface you are working on. It is important to apply it meticulously in circular or straight motions.

5. Section-by-Section Work: Work on one panel (e.g., hood, door, fender, etc.) at a time. Trying to work on a large area at once can result in streaks.

6. Buffing: Within 3-5 minutes of application, use a clean, soft microfiber towel to buff the surface, removing any remaining residue. Be careful not to rub too hard, and it is recommended to switch to a clean side of the towel frequently. Be aware that if the buffing time is delayed too long, it may become difficult to wipe off the residue.

7. Repeat Entire Process: Repeat the above steps on the entire vehicle surface.